WinSPS-S7 is a programming and simulation software for S7-PLCs (S7-300 and compatible PLCs). With the on-board Software-PLC you can simulate your PLC program without any hardware PLC. WinSPS-S7 has also a hardware configurator that supports Profibus-DP.
plc siemens 1200 COMMUNICATION PROCESSOR CP 1242-7 FOR CONNECTION OF SIMATIC S7-1200 TO GSM/GPRS NET PLEASE NOTE NATIONAL APPROVALS
Transmission rate | |
Transfer rate / with GPRS transmission | |
| 43 kbit/s |
| 86 kbit/s |
Wireless technology | |
Type of mobile wireless service | |
| |
| Yes |
| Yes |
| GPRS (multislot Class 10) |
Type of mobile wireless network / is supported | |
| Yes |
| No |
Operatng frequency | |
| Yes |
| Yes |
| Yes |
| Yes |
Transmit power | |
| 2 W |
| 2 W |
| 1 W |
| 1 W |
Interfaces | |
Number of electrical connections | |
| 1 |
| 1 |
Number of slots / for SIM cards | 1 |
Design of the electrical connection | |
| SMA socket (50 ohms) |
Design of slot / for SIM card | Slot under front flap |
Supply voltage, current consumption, power loss | |
Type of voltage / of supply voltage | DC |
Supply voltage / external | 24 V |
Relative positive tolerance / at 24 V / with DC | 20 % |
Relative negative tolerance / at 24 V / with DC | 20 % |
Consumed current / from external supply voltage / at 24 V / with DC | |
| 0.1 A |
| 0.22 A |
Resistive loss | 2.4 W |
Permitted ambient conditions | |
Ambient temperature | |
| 0…45 °C |
| 0…55 °C |
| -40…+70 °C |
| -40…+70 °C |
Relative humidity / at 25 °C / without condensation / during operating / maximum | 95 % |
Protection class IP | IP20 |
Design, dimensions and weight | |
Width | 30 mm |
Height | 100 mm |
Depth | 75 mm |
Net weight | 0.133 kg |
Product properties, functions, components / general | |
Number of units / per CPU / maximum | 3 |
Performance data | |
Number of possible connections / for open communication / by means of TC blocks / maximum | 5 |
Data volume / as user data per polling / maximum | 1024 byte |
Performance data / S7 communication | |
Connection to the control center | Telecontrol Server Basic |
| Connection to Scada system using OPC interface |
| supported |
| supported |
Protocol / is supported | |
| No |
| No |
Product function / data buffering if connection is aborted | Yes |
Product function / data buffering if connection is aborted / note | up to 1000 message frames |
Data volume / as user data per station / in telecontrol mode / maximum | 2048 byte |
Performance data / Teleservice | |
Diagnostic function / online diagnostics with SIMATIC STEP 7 | Yes |
Product function | |
| Yes |
| No |
Product functions / Security | |
Product function | |
| Yes |
| Yes |
Product functions / Time | |
Protocol / is supported / NTP | Yes |